Pricing
Categorie
Merk
Zoek code
ALPA2AD6S1E
Specifications
Shaft type
Spline Z=9 SAE Ø15,88 mm
Ø Fitting edge
82.55 mm
Stroke volume / Pump group
4,5 cc (group 2)
front flange
SAE 2 hole
Direction
CW
Operating pressure
250 bar
Hydraulic connecting ports
Standard European port
Single-For-Between-End
front pump
Extra
Build type | front pump |
Medium | hydraulic oil |
Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up |
Temperature range | -15⁰C +80⁰C |
Inlet pressure | 0,7 - 3 bar |
Size mounting holes front | 106,4 mm |
key width | 3,97 mm |
Material front and back | aluminium |
Material housing | aluminium |
Material seal | rubber |
Material gears | special hardened steel |
Flange | SAE A version, 2-hole mounting, Ø 82,55 mm |
Shaft type | spline shaft |
Connection | standard european port |
Rotation | cw |
Displacement | 4,5 cm3/rev |
Pressure continuous | 250 bar |
Max. pressure intermittent | 270 bar |
Max. peak pressure | 290 bar |
Max. revs | 4000 rpm |
Min. revs | 800 rpm |
Shaft diameter | 15,88 mm |
Shaft length | 24 mm |
Shaft length inc. fitting edge | 32 mm |
Height fitting edge | 6,4 mm |
Dia. fitting edge | 82,55 mm |
Center inlet - front | 45,5 mm |
Front - back excl. fitting edge | 93,5 mm |
Thread mounting bolt sunction side | 7/8-14 UNF |
Thread connection sunction side | UNF |
Thread bolt press side | 7/8-14 UNF |
Thread connection press side | UNF |
Dia. mounting hole front | 11,1 mm |
Flow at 1500 Rpm | 6,4 l/min |
Max. torq shaft | 185 Nm |
Volume efficiency | 95% at 1500 rpm |